

I also see a similar issue. The iso is created but it is 0 bytes in size, therefore useless. I have only just tried this app for the 1st time today and it looks promising but this is a show stopper. Using openSUSE 11.4 64bit. Strangely the app reports "WARNING ! Missing dependancies :FFMPEG" on start which is erroneous as ffmpeg has been installed for years.
Hope someone can shed some light on this.
Dave - Jul 14 2011

Plasma 4 Extensions by finkandreas 301 comments
Thanks for all your help. I've actually fixed the issue. It appears it was simply a disparity in a start up script somewhere (don't exactly know where, but not bothered at this point :-) ). I did some more updates from the Tumbleweed repository that I mentioned earlier. This has fixed the issue and all is now functioning as it used to.
Again, many thanks for your help and insights, they actually provided me with the clue as to what may have happened.
Cheers
Dave - Mar 03 2011

Plasma 4 Extensions by finkandreas 301 comments
Thanks for taking the extra time on this small issue. Unfortunately I'm a little out of my comfort zone at the moment. However:
cat /proc/mounts
rootfs / rootfs rw 0 0
devtmpfs /dev devtmpfs rw,relatime,size=2022132k,nr_inodes=505533,mode=755 0 0
tmpfs /dev/shm tmpfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
/dev/sda1 / ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
obexautofs /mnt/host fuse.obexautofs rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
/dev/sda4 /media/backup ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
/dev/sdb1 /home ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
obexautofs /mnt/host fuse.obexautofs rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0 0 0
proc /var/lib/ntp/proc proc ro,nosuid,nodev,relatime 0 0
Are the 2 root entries you expect to see there? I think they are from your description but it would be great if you could confirm. I have rebuilt the initrd just in case and rebooted prior to running the cat command above. The situation still remains the same. If I am missing something here then a pointer to the relevant documentation or action I could take to resolve would be great. I really appreciate the time you are taking to assist.
Best regards
Dave - Mar 03 2011

Plasma 4 Extensions by finkandreas 301 comments
I am running kernel 2.6.37.2-15-desktop which comes from the Tumbleweed repository on openSUSE 11.3. The df command shows the following:
dave@opensuse113:~> df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda4 243668872 89560596 141730600 39% /media/backup
/dev/sdb1 240362656 76351556 151801300 34% /home
dave@opensuse113:~> sudo df
root's password:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda4 243668872 89560596 141730600 39% /media/backup
/dev/sdb1 240362656 76351612 151801244 34% /home
which as you can see is the same for both the normal user and root. However, I will see if I can track down any settings that may affect the lack of / info as you suggest. In the mean time, are you aware of what permissions may be set and where?
Thanks for your input.
Dave - Mar 03 2011

Plasma 4 Extensions by finkandreas 301 comments
TIA
Dave - Mar 03 2011

Plasma 4 Extensions by finkandreas 301 comments
First, thanks for a great plasmoid it's been working well for weeks. Now, suddenly, it cannot parse systemmonitor:partitions/root/freespace:value and simply freezes at this point. The same line for systemmonitor:partitions/home works fine which appears after this in the script. I am simply commenting out the root entries for now. Any ideas why this might be happening? I can't think of anything that has changed on my system.
Thanks in advance. - Mar 01 2011

Icon Sub-Sets by KevinKofler 13 comments

Icon Sub-Sets by KevinKofler 13 comments

Icon Sub-Sets by KevinKofler 13 comments
Reading the archive '/home/dave/Downloads/oxygen-plasma-icons-1.tar.xz' failed with the error 'The archive reading failed with message: Unrecognized archive format: Invalid or incomplete multibyte or wide character'
Which archiver application would you recommend. I have tried ark and xarchiver with the same error in both cases. TIA. - Nov 13 2010